Description
- High DC switching capacity
- Adjustable humidity
- Small hysteresis
- Optical operating display (LED)
- Integrated switch module
- Precise measurement via an external sensor
The electronic DC hygrostat with an integrated switch module is used to control heating and cooling equipment, filter fans, or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity. Additionally, this hygrostat is available in versions that not only measure the relative humidity via the external sensor, but also the temperature.
- High DC switching capacity
- Adjustable humidity
- Small hysteresis
- Optical operating display (LED)
- Integrated switch module
- Precise measurement via an external sensor
|
Switching difference (humidity) |
: 4 % RH (±1 % tolerance) at +77 °F (+25 °C), 50 % RH |
|
Max. reaction time |
: Approx. 5 sec |
|
External sensor |
: Cable 2 m with snap in connector (included in the delivery) |
|
Contact type |
: Contact maker NO (MOSFET) or contact breaker NC (MOSFET) |
|
Dimensions |
: 3.7 x 2.1 x 1.7" (93 x 53 x 44 mm) |
|
Connection |
: 6-pole terminal: stranded wire1 AWG 16 (1.5 mm²); max. AWG 12 (2.5 mm²) |
|
Housing |
: Plastic, UL 94V-0, grey (bicolor) |
|
Storage temperature |
: -40 to +176 °F (-40 to +80 °C) |
|
Protection type/Protection class |
: IP20 |
|
Approvals |
: UL File No. E164102, VDE, EAC |
|
Datasheet |
|